DH-PFE221-LP1240CP-M100 100 Wp Integrated Solar Power Supply System with 40 Ah Battery - White
The integrated solar power supply system combines a 100 Wp monocrystalline silicon photovoltaic panel with a 12.8 VDC 40 Ah/512 Wh lithium iron phosphate battery. It provides a 12.8 VDC output range of 11.2-14.6 VDC at a maximum output current of 5 A and uses PWM charging. The solar panel operates at 18.40 VDC and 5.64 A with an efficiency of at least 17%.
The white IP66 system supports unified installation of a camera alongside the solar panel and battery on a vertical pole measuring 80-140 mm in diameter. Charging is specified from -20 °C to +50 °C, with battery heating active from 0 °C to +5 °C, while discharging is specified from -20 °C to +55 °C. Battery information and statistics are available through O&M functions, with indicators for solar panel, battery and load status.
Key Features
- The 512 Wh battery provides a calculated standard standby time of 102 hours for a 5 W total load at 20 °C.
- The lithium iron phosphate battery is rated for 2,000 charge-discharge cycles while retaining at least 80% of its initial capacity.
- Specified discharge capacity remains at least 65% at -20 °C and 90% at +55 °C under a 0.2 C test rate.
- Protection functions cover overcurrent, overheating, overcharging, over-discharge and short-circuit conditions.
- Adjustable 20°, 35° and 50° panel positions provide three fixed solar-orientation options.
- Product Type:
- Power Supply
- Output Voltage Range:
- 12.8VDC
- Input Voltage Range:
- 18.40VDC
- Type of Device:
- INTEGRATED SOLAR SYSTEM (WITH BATTERY)
- Output Amps:
- 5A
- IP Rating:
- IP66
- Inputs Type:
- SOLAR PANEL - MONOCRYSTALLINE SILICON
- Input Amps:
- 5.64A
- Output Number:
- 2
- Output Type:
- 2.1mm
- Mounting:
- VERTICAL POLE MOUNT
- Colour:
- White
